Saturday, May 16, 2020

Helping automatic system in the battle against Corona Virus 19.- Sistema per eliminare il Covid19

Have you ever wondered how much it costs to sanitize a factory, offices, a supermarket, a Mall, gyms, etc. "every morning" ?.... and above all, given who you rely on for this work (people of low skill),...have you ever wondered how reliable is the work done and its  "long term" quality? 
It is a precise and repetitive work that bores and therefore it is natural to wonder how reliable is the human work performed in this way.

... but now all this it's a MUST for safety!!!

The costs are and will be very high, especially for the general food industry and commonplaces, shopping malls etc. .
From here Siscodata started to think about using a COMAU AGILE modified in 2 versions respectively called UV and Electrostatic Nebulizer.
The programmability 'of the path carried out in hours "dead" as at night, in this case ensures to arrive in the morning with a clean environment with a log of the work performed.
The version with UV -C is designed to carry the lamps with LEDs, these do not have the limit of 8000 h of operation of mercury vapor lamps and do not have the time to warm up before starting to emit (in addition to the difficult ecological recycling after the mercury) or through a special wheelbarrow under which you go to insert the AGV that brings it in the particular area to be sanitized and eventually leaves it in contact with the docking plug that will power it for the time needed (eg a room that has hosted a positive Covind19).
If, for example, it takes 15 minutes for a complete cleaning, in serious cases the AGV leaves the lamps for this time and goes to get another UV trolley.
The second version with electrostatic nebulizer, uses a Comau RACER robot on board to spray disinfectant nebulized from a container of 50L-100L; the fact of using the electrostatic charge generated inside the nebulizer, allows to ensure the germicidal coverage even inside the cavity or on the reverse side of an object where it is attracted by electrostaticity (as happens on the other hand also in the painting for car doors etc.).
It will be enough in all cases to have the "follow me" and "teach" function activated to have optimized paths and repetitive quality certainties. 
 AGV robots are able to autonomously navigate throughout a given room while eliminating microorganisms with UVC lights. Their laser sensors allow them to map out the room’s layout and plan routes for automatic, area-by-area disinfection.

The autonomous disinfection robots are capable of sensing and making their way around physical obstructions without external help, but as effective as they may be, these robots cannot be deployed in environments with human presence because UVC radiation is harmful for the human body.Main studies  estimate a 15-minute disinfection time per room per robot, with about 8W lamp for  every  12 msquare.



Vi siete mai chiesti quanto costa sanificare uno stabilimento ,degli uffici ,un supermercato,un Mall ,palestre etc "tutte le mattine"??.... e sopratutto ,visto a chi ci si affida per questo lavoro (persone di bassa manovalanza),vi siete chiesti quanto sia affidabile il lavoro svolto e la sua qualita' nel tempo?E' un lavoro preciso e ripetitivo che annoia e quindi viene naturale chiedersi quanto sia affidabile il lavoro umano così eseguito?
.....ma ora è un MUST per la sicurezza !!

I costi sono e saranno altissimi, specie per la general industry alimentare e i luoghi
comuni ,centri commerciali etc .

Di qui è partita Siscodata per pensare di utilizzare un AGILE COMAU modificato in 2
versioni rispettivamente chiamate UV e N per Nebulizzatore elettrostatico .

La programmabilita' del percorso svolto in ore "morte" come di notte,in questo caso
assicura di arrivare al mattino con l'ambiente pulito con tanto di log del lavoro eseguito .




La versione con UV -C è pensata per portarsi dietro le lampade a LED ,queste non
hanno il limite di 8000 h di funzionamento delle lampade a vapori di mercurio ;non hanno
il tempo di riscaldamento prima di iniziare ad emettere (oltre al difficile riciclaggio
ecologico dopo del mercurio).Invece del fissaggio a bordo si puo' avere  in alternativa un apposito carrellino sotto cui si va ad inserire l'AGV che lo porta nella particolare zona da sanificare ed eventualmente lo lascia in loco mettendolo in contatto con la docking plug che lo alimenterà per il tempo necessario (esempio una stanza che ha ospitato un positivo Covind19).
Nel caso ad esempio servano per una completa pulizia 15 minuti, in casi gravi l'AGV
lascia infatti le lampade per questo tempo e va a prendere un altro carrello UV.

La seconda versione N con nebulizzatore elettrostatico ,sfrutta un robot Comau
RACER a bordo  dell'AGV per spruzzare disinfettante nebulizzato da un contenitore da 50L-100L;il fatto di utilizzare la carica elettrostatica generata all' interno del nebulizzatore ,permette di assicurare una copertura germicida anche all'interno di cavita' o sul rovescio di un oggetto dove viene attratta per elettrostaticità (come avviene d'altro canto anche nella
verniciatura per le portiere auto etc ).
Bastera' in tutti i casi attivare  la funzione "follow me" e " teach " attivata per avere percorsi
ottimizzati e certezze ripetitive di qualita'.
Un apposito KIT PROMO è stato pensato per il lancio del prodotto composto da:

  •   technician 4 days  for istallation and training 
  • + battery charger,
  • +the unit with the lamp
  • + one docking station
  • +radar motor sensor AUTO stop (so when  people detected then lamp shut off).
















Ask for PROMO KIT quotation or for more info at 
Tel. +39 - 0332 - 472471 Fax +39 - 0332 - 475272
e-mail: info@siscodata.com
web: www.siscodata.com asking of Mr.Brambilla  or Dr.s Cattaneo























































Tuesday, May 12, 2020

COVID-19 Surgical MASK FULL AUTOMATION - AUTOMAZIONE MASCHERINE PER VIRUS

Con riferimento anche al precedente post per l'automazione del processo di realizzazione e  packaging delle mascherine fino al loro inscatolamento la linea di robotizzazioni SISCODATA per la lotta al CORONA VIRUS è stata ampliata e perfezionata .Ad oggi perciò Siscodata e' in grado di fornire 2 differenti tipi di soluzioni robotiche  per i costruttori di mascherine chirurgiche .La prima soluzione prevede la diretta connessione delle macchine di cucitura ed applicazione degli elastici per le orecchie alla linea di  imballo della singola mascherina con relative istruzioni/cartoncino ed alla sua successiva introduzione dopo conteggio nella scatola FEFCO 0406 formata da foglio pianodi cartone Kraft o micronda fustellato .  .





La seconda soluzione risulta valida specialmente per i produttori di grosse dimensione e con grossi valori numerici. prevede che le masckherine siano prodotte in un apposito settore separato che va a caricare un magazzino temporaneo  di cartucce che invece dei cestoni attuali mantengono le mascherine in posizione ordinata il robot poi le preleva ad alta velocita' e le deposita sul nastro a facchineti della flowpack 


With reference also to the previous post on the automation process of realization and packaging of the surgcal mask up to their boxing, the line of SISCODATA robotization for the fight against CORONA VIRUS has been expanded and perfected. So far Siscodata is able to provide 2 different types of robotic solutions for manufacturers of surgical masks. The first solution foresees the direct connection of the sewing machines and the application of ear elastics to the packaging line of the single mask with relative instructions/carton and its subsequent introduction after counting in the FEFCO 0406 box made of flat Kraft cardboard or micronda die-cut sheet.  .


The second solution is especially valid for large producers with large numerical values. it provides that The second solution is especially valid for large manufacturers with large numerical values. It foresees that the masks are produced in a separate area that is used also to load a temporary stock of cartridges that instead of the current randomly filled baskets keep the masks in an orderly position.The robot do not need so of sophist
icated vision systems and runs at highest speed .
For more details on the fullautomatic system from manufacuturing upto box closed ask to info@siscodata.com or call dr.ssa Laura Cattaneo or Mr. Brambilla at + 39.0332.472.471

Killing UV Mobile Robot far superior than humans In cleaning rooms by COVID-19-Killer UV Mobile Robot UV di gran lunga superiore ad un umano nella pulizia delle stanze da COVID-19

Bacteria-Killing UV Mobile robot is far superior than humans 
in cleaning  rooms by COVID-19
The UV 19 Killer compact  beam device employs UV-C LEDs to kill pathogens.
Bacteria, viruses and spores all have a unique sensitivity to various ultraviolet (UV) wavelengths and exposure times – two specifications that can be discovered with the UV 19 Killer.
The small size and ease of use of the UV 19 Killer allows the realisation of a table-top homogenised UV delivery system, which can be operated virtually anywhere in a laboratory or out in the field. Unlike mercury-lamp systems, the UV 19 Killer features a narrow band emission and is available with single, double or triple wavelengths ranging from 255nm to 365nm. The unit can also be fully customised to fit a specific need.
The system consists of a UV C LED module, a controller, and a collimating tube. The beam radiates a testing area of 45.6cm2 with a Petri Dish Factor >0.9, providing a homogeneous intensity distribution that is key for accurate dosimetry testing.
LEDs require no warm-up time, and can endure an infinite number of on/off cycles, and reach their full intensity in less than 10ns, which means the UV 19 Killer essentially has an instantaneous shutter speed.
Thanks to the AGV 1500 Comau used, it is possible to "train" the unit in a simple way "follow me" memorizing  the daily path  that will then be performed at night in the offices or in the plant building or in the hotel aisle   in the most appropriate hours and less frequented by people .The path can so be optimized to have the maximum efficiency in killing virus.​.
The agv can run and use a technique of lurking to tow the lamp along the programmed path and irroring all the trip of UV-C and later docking the lamp tower in a special plug to let it working for sterylizing meanwhile the AGV goes to move another tower on wheels inanother location so ,optimizing the paths.
Killer UV Mobile Robot UV di gran lunga superiore ad un umano nella  pulizia delle stanze da COVID-19

Il dispositivo a fasci di raggi ultravioletti mobile UV 19 Mobile Killer utilizza LED UV-C per uccidere gli agenti patogeni.
Batteri, virus e spore hanno tutti una sensibilità unica alle varie lunghezze d'onda ultraviolette (UV) e ai tempi di esposizione - due specifiche che possono essere scoperte con l'UV 19 Killer.
Le dimensioni ridotte e la facilità d'uso dell'UV 19 Killer consentono di realizzare un sistema di erogazione UV omogeneizzato , che può essere utilizzato praticamente ovunque in laboratorio o sul campo. A differenza dei sistemi con lampada al mercurio, l'UV 19 Killer è caratterizzato da un'emissione a banda stretta ed è disponibile con lunghezze d'onda singole, doppie o triple che vanno da 255nm a 365nm. L'unità può anche essere completamente personalizzata per soddisfare una specifica esigenza.
Il sistema è composto da un modulo LED UV C, un controller . Il fascio irradia un'area di prova di 45,6  cm2 con un fattore di piatto di Petri >0,9, fornendo una distribuzione omogenea dell'intensità che è la chiave per un test dosimetrico accurato. 
I LED non richiedono alcun tempo di riscaldamento e possono sopportare un numero infinito di cicli di accensione/spegnimento (cosa che una lampada tradizionale a vapori non  e raggiungere la loro piena intensità in meno di 10ns, il che significa che l'UV 19 Killer ha essenzialmente una velocità  istantanea come qualsiasi LED.
Grazie all'AGV 1500 Comau utilizzato, è possibile "addestrare" l'unità in modo semplice "seguimi" memorizzando il percorso giornaliero che verrà poi effettuato di notte negli uffici o nell'edificio dell'impianto o nel corridoio dell'albergo nelle ore più opportune e meno frequentate dalle persone; il percorso può essere così ottimizzato per avere la massima efficienza nell'abbattimento dei virus.
L'agv può correre e utilizzare una tecnica di aggancio per trainare la lampada lungo il percorso programmato e irritare tutto il viaggio di UV-C e successivamente agganciare la torre della lampada in una spina speciale per farla funzionare per la sterilizzazione mentre l'AGV va a spostare un'altra torre su ruote in un'altra posizione così, ottimizzando i percorsi.


 For more info write mail to info@siscodata.com or call +39.0332.472471 asking of Dr.Laura Cattaneo or Mr.Brambilla
















Friday, May 1, 2020

COVID-19 we are producing robotic lines for MASK .Linea per produzione mascherine automatica

 Nel periodo di crisi sanitaria attuale Siscodata ha  studiato moduli robot per  la produzione di mascherine di tipo chirurgico  in collaborazione per la parte iniziale con un  partner italiano attivo nel campo del tessuto non tessuto ,proseguendo poi nella applicazione del suo tradizionale know how nel campo del packaging .
La linea così creata puo' essere composta con i moduli per creare e  gestire in modo automatico tramite robot  le mascherine nella parte successiva alla formazione  continuando con il loro imballo singolo  in busta sigillata insieme al foglio di istruzioni e successivamente al conteggio delle mascherine ,alla formazione delle scatole da foglio piano e loro riempimento e chiusura .



Sono previsti un modulo per la produzione fino a 6000 maschere  per ora con doppia uscita .Le mascherine in uscita possono in un caso  venir controllate dall'operatore e caricate  poi in pile su delle cartucce che funzionano da buffer temporaneo (vedi foto a lato) .Le cartucce ,ognuna in grado di contenere alcune  centinaia di maschere, possono poi essere trasportate tramite AGV Agile COMAU ed  inviate ai moduli di carico. Qui tramite un robot antropomorfo e pinza multipla le maschere sono caricate in sincronia sul  trasporto di ingresso di una flowpack  dove nella stazione precedente un distributore aveva inserito un foglietto istruzioni La linea continua con la formatura della scatola 0406 FEFCO il suo  riempimento e chiusura.More info at  info@siscodata.com 
or call +39.0332472471 ask of Mr.Brambilla


 During the current health crisis Siscodata has studied robot modules for the production of surgical masks in collaboration with an Italian partner active in the field of nonwovens, continuing its innovative  application of  his  traditional know how in the field of packaging.

The line created in this way can be composed by combining  the modules in order to create and manage automatically by robot the surgical masks in the part following the manufacturing process  with  the  single mask packaging into a sealed bag together with the instruction leaflet and then the counting of the masks, the formation of the flat sheet boxes and their filling and closing.

 There is a module for the production of up to 6000 masks per hour with double output .The output masks can in one case be controlled by the operator and then loaded in stacks on cartridges that act as a temporary buffer (see photo on the side) .The cartridges, each capable of containing several hundred masks, can then be transported via AGV Agile COMAU and sent to the loading modules. Here, by means of an anthropomorphic robot and multiple gripper, the masks are loaded in sync on the infeed transport of a flowpack where in the previous station a distributor had inserted an instruction leaflet.Info at info@siscodata.com or call at  +39.0332.472.471  ask of Mr.Brambilla  ......more robotic unit are coming!!!